Latitude 3340/Latitude 3340 2-in-1 Service Manual

Installing the speakers without antenna

About this task

NOTE:If the rubber grommets are pushed out when removing the speakers, push them back in place before replacing the speakers.

The following images indicate the location of the speakers and provide a visual representation of the installation procedure.

1. Align and place the speakers in the slot on the chassis.
2. Route the speaker cables through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the connector on the system board.
4. Connect the I/O board-cable to the connector on the system board and close the latch.