Dell Latitude 3301 Service Manual

Removing the display assembly

1. Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board.
2. Lift the display-cable bracket off the system board.
3. Using the pull tab, disconnect the display cable from the system board.
4. Remove the two screws (M2.5x3.5) that secure the left display hinge to the I/O board and palm-rest and keyboard assembly.
5. Remove the screw (M2x4) that secures the right display hinge to the system board.
6. Open the display hinges at an angle of 90 degrees.
7. Remove the two screws (M2x4) that secure the left and right display hinges to the I/O board and palm-rest and keyboard assembly.
8. Peel the tape and using the pull tab, remove the display cable from the system board.
9. Open the display assembly as far as possible.
10. Remove the palm-rest and keyboard assembly off the display assembly.