Dell Latitude 3300 Service Manual

Removing the display assembly

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. microSD card
   2. base cover
   3. battery
   4. WLAN card
   5. DC-in cable
3. Remove the tape [1] and unroute the antennae cable [2] near the fan case.
4. Remove the single screw that secures the EDP bracket [3] and remove it off the EDP connector on the system board [4].
5. Disconnect the EDP cable from the system board [5].
   
6. Remove the five M2.5x5.0 screws securing the LCD hinges to the computer.
   
7. Open the lid slightly.
   
8. Separate the hinges from the palmrest and separate the display assembly from the computer.