Dell Latitude 3300 Service Manual

Installing the LCD panel

1. Connect the eDP cable to the system board [1] while holding the cable and close the actuator on the connector [2].
2. Stick the tape on the connector [3] securing the eDP cable to the LCD panel and flip over the LCD panel to rest on the LCD back cover [4].
   
3. Align the LCD panel to the back cover [1] and install the four M2.0x3.0 screws to secure the LCD panel to the LCD back cover [2].
   
4. Install the:
   1. display bezel
   2. display assembly
   3. DC-in cable
   4. WLAN card
   5. battery
   6. base cover
   7. microSD card
5. Follow the procedure in After working inside your computer.