SATA Operation
|
Allows you to configure the operating mode of the integrated hard drive controller.
- Disabled = The SATA controllers are hidden
- AHCI = SATA is configured for AHCI mode
- RAID ON = SATA is configured to support RAID mode (selected by default)
|
Smart Reporting
|
This field controls whether hard drive errors for integrated drives are reported during system startup. The
Enable Smart Reporting option is disabled by default.
|
USB Configuration
|
Allows you to enable or disable the integrated USB controller for:
- Enable USB Boot Support
- Enable External USB Port
All the options are enabled by default.
- Optimize USB (selected by default)
- Optimize GPS
|
USB PowerShare
|
This option configures the USB PowerShare feature behavior.
- Enable USB PowerShare - disabled by default
This feature is intended to allow users to power or charge external devices, such as phones and portable music players, using the stored system battery power through the USN PowerShare port on the notebook, while the notebook is in a sleep state.
|
Audio
|
Allows you to enable or disable the integrated audio controller. The option
Enable Audio is selected by default.
- Enable Microphone
- Enable Internal Speaker
Both the options are selected by default.
|
Keyboard Illumination
|
This field lets you choose the operating mode of the keyboard illumination feature. The keyboard brightness level can be set from 25% to 100%. The options are:
- Disabled
- Level is 25%
- Level is 50%
- Level is 75%
- Level is 100%-enabled by default
|
Tablet Buttons Illumination
|
This controls the LED brightness for the following tablet buttons: Power, Rotation Lock, LCD Brightness Down, LCD Brightness Up, Volume Down, Volume Up, P1, P2, and P3. The options are:
- Off
- Level is 25%
- Level is 50%
- Level is 75%
- Level is 100%-enabled by default
|
Keyboard Backlight Timeout on AC
|
The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is not affected. Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the backlight is enabled. The options are:
- 5 sec
- 10 sec-enabled by default
- 15 sec
- 30 sec
- 1 min
- 5 min
- 15 min
- Never
|
Keyboard Backlight Timeout on Battery
|
The Keyboard Backlight Timeout dims out with the Battery option. The main keyboard illumination feature is not affected. Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the backlight is enabled. The options are:
- 5 sec
- 10 sec-enabled by default
- 15 sec
- 30 sec
- 1 min
- 5 min
- 15 min
- Never
|
RGB Keyboard Backlight
|
The RGB keyboard backlight feature: There are six available colors: four preset colors (white, red, green, and blue) and two user configurable colors.
- White: Enabled and Active
- Red: Enabled
- Green: Enabled
- Blue: Enabled
- Custom1: Disabled by default
- Custom2: Disabled by default
|
Touchscreen
|
This field controls whether the touchscreen is enabled or disabled
- Touchscreen (selected by default)
|
Stealth Mode Control
|
This option configures the Dell Stealth Mode feature:
Checking 'Enable Stealth Mode' enables this feature. Default is enabled:
- Disable onboard LEDs
- Disable onboard LCD screen
- Disable onboard speaker*
- Disable onboard fans*
- Disable Bluetooth radio*
- Disable GPS receiver*
- Disable WLAN radio*
- Disable WWAN radio*
* - when present
|
Fingerprint Reader
|
- Enable Fingerprint Reader Device (enabled by default)
Enable or disable the Fingerprint Reader Device
|
Miscellaneous Devices
|
Allows you to enable or disable the following devices:
- Enable User-Facing Camera (enabled by default)
- Enable World-Facing Camera (enabled by default)
- Enable Dedicated GPS Radio (enabled by default)
- Enable Secure Digital (SD) Card (enabled by default)
- Secure Digital (SD) Card Boot
- Secure Digital (SD) Card Read-Only Mode
|