Latitude 12 Rugged Extreme Tablet – 7212 Owner's Manual

Removing front camera

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. Battery
   2. Display assembly
3. To remove the front camera:
   1. Place the back side of system on a flat surface.
   2. Locate the front camera.
   3. Slide the camera shutter towards right, to bring the lens cover is in the open position [1].
   4. Insert the edge of the plastic scribe between the gap of lens shutter and lift camera lens shutter [2].
      
   5. Remove the screws (2) that secure the camera on the system chassis [1].
   6. Lift the lens case at the edge to insert the plastic scribe in the gap and lift the lens case by an angle not more than 35° and push upward to release the camera lens case [2].
      
   7. Flip the camera circuit board with a plastic scribe [1].
   8. Disconnect the camera cable that secures the cable to the system board [2].