Latitude 5289 2-in-1 Owner's Manual

Removing the NVMe SSD card

1. Follow the procedure in Before working inside your computer.
2. Remove:
   1. MicroSD card
   2. base cover
   3. battery
      NOTE: You need not remove the battery, instead you can disconnect the battery cable from the system board.
3. To remove the NVMe SSD card:
   1. Remove the M2.0 x 3.0 screws that secure SSD thermal bracket and lift the thermal bracket [1].
   2. Slide the thermal bracket from the SSD card [2].
   3. Slide and remove the SSD card from the slot on the computer [3].