Dell Latitude 5280 Owner's Manual

Installing display assembly

1. Place the chassis on the edge of a plane surface.
2. Align the display assembly to align with the screw holders on the computer.
3. Tighten the M2*5 screws to secure the display assembly to the computer.
4. Lift the computer and close the display.
5. Connect the display cable and IR camera cable to the connectors on the system board.

   NOTE: IR cable only for IR camera models.

6. Place the metal bracket to secure the display cable.
7. Tighten the M2*5 screws to secure the display cable.
8. Route the WLAN and WWAN cables through the routing channels.
9. Install the:
   1. display hinge cover
   2. hard drive assembly(optional)
   3. WLAN card
   4. WWAN card(optional)
   5. battery
   6. base cover
10. Follow the procedure in After working inside your computer.