Latitude 3190 Owner's Manual

Removing display bezel

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   NOTE The display bezel of Latitude 3190 is a disposable service part that should be replaced with a new display bezel anytime it is removed from the system. This also applies to removal of the bezel during the replacement of the display panel, and display back-cover and antenna assembly.
   1. base cover
   2. battery
   3. display assembly
3. Remove the hinge cap and the mylar cap that secures the display bezel to the display assembly [1].
   
4. Remove the four M2.5x3.5 screws and pry the edges to release the display bezel from the display assembly [2,3].