Latitude 3190 Owner's Manual

Removing camera

1. Follow the procedure in Before working inside your computer.
2. NOTE When replacing the display cable onto the display back- cover of the Latitude 3190, on-site technicians must first disconnect the cable from the camera module, and carefully peel back the pieces of aluminum foil securing the display cable to the display back-cover, and then re-adhere the foil after replacing the display cable, as indicated in the image below.
   NOTE Technicians should note that the display hinges, display cable, and camera are also separate service parts that can be individually replaced
   Remove the:
   1. base cover
   2. battery
   3. display assembly
   4. display bezel
   5. display panel
3. To remove camera:
   1. Disconnect the camera cable from the connector [1].
   2. Lift the camera from the display back cover [2].