With CommVault Simpana, you must add an NDMP library to detect tape devices attached to an
PowerScale cluster before you can backup data to those devices.
Add the CommVault Simpana server to the configuration.
In the
CommCell Browser, click
Storage > Library and Drive.
In the
Select MediaAgents window, add the Simpana server you are currently using, and then click
OK.
Detect NDMP devices attached to the cluster.
In the
Library and Drive Configuration window, click
Start > Detect/Configure Devices.
Click
NDMP Devices.
Click
OK.
In the
Select NDMP Servers to Detect window, add the
PowerScale cluster you want to backup data from, and then click
OK. The system informs you that library services are stopped during the detection process.
Click
Yes.
After the detection process is complete, close the
Log window.
In the
Library and Drive Configuration window, select the media changer that controls the tape drives that you want to back up data to.
You can view the name of the media changer by right-clicking the media changer and then clicking
Properties.
Right-click the media changer you selected, and then click
Configure.
Click
Library and all drives and then click
OK.
In the
Confirm dialog box, specify whether the library has a barcode reader.
In the
Discover Media Options window, specify the default media type.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\