PowerScale OneFS 9.3.0.0 CLI Command Reference

Syntax

isi network external modify
[--sbr {true | false}]
[--revert-sbr]
[--sc-rebalance-delay <integer>]
[--revert-sc-rebalance-delay]
[--tcp-ports <integer>]
[--clear-tcp-ports]
[--add-tcp-ports <integer>]
[--remove-tcp-ports <integer>]
[--revert-tcp-ports]
[--verbose]

Options

--sbr {true | false}

Enables or disables source-based routing on the cluster. Source-based routing is disabled by default.

--revert-sbr

Sets the value of --sbr to the default system value.

--sc-rebalance-delay <integer>

Specifies a period of time (in seconds) that should pass after a qualifying event before an automatic rebalance is performed. The default value is 0 seconds.

--revert-sc-rebalance-delay

Sets the value of --sc-rebalance-delay to the default system value.

--tcp-ports <integer>

Sets a list of recognized client TCP ports. 65535 is the maximum supported port number. You can specify multiple TCP ports separated by commas, or specify this option for each additional TCP port.

--clear-tcp-ports

Removes all client TCP ports.

--add-tcp-ports <integer>

Adds one or more recognized client TCP ports, separated by commas, to the existing list. 65535 is the maximum supported port number.

--remove-tcp-ports <integer>

Removes one or more recognized client TCP ports, separated by commas.

--revert-tcp-ports

Sets the value of --tcp-ports to the default system value.

{ --verbose | -v}

Displays more detailed information.