PowerScale OneFS 9.3.0.0 CLI Command Reference

Syntax

isi event channels <name>
        [--type {smtp | snmp | connectemc}]
        [--enabled {true | false}]
        [--allowed-nodes <integer>]
        [--clear-allowed-nodes]
        [--add-allowed-nodes <integer>]
        [--remove-allowed-nodes <integer>]
        [--excluded-nodes <integer>]
        [--clear-excluded-nodes]
        [--add-excluded-nodes <integer>]
        [--remove-excluded-nodes <integer>]
        [--address <string>]
        [--clear-address]
        [--add-address <string>]
        [--remove-address <string>]
        [--send-as <string>]
        [--subject <string>]
        [--smtp-host <string>]
        [--smtp-port <integer>]
        [--smtp-use-auth <boolean>]
        [--smtp-username <string>]
        [--smtp-password <string>]
        [--smtp-security {STARTTLS | NONE}]
        [--batch {NONE | ALL | CATEGORY | SEVERITY}]
        [--batch-period <integer> <time>]
        [--host <string>]
        [--community <string>]
        [--verbose]

Options

<name>

Specifies the name of the channel you want to modify.

<type>

Specifies the mechanism by which alerts are sent.

Type values are case sensitive. The following values are valid:

smtp

Alerts are sent as emails through an SMTP server.

snmp

Alerts are sent through SNMP.

connectemc

Alerts are sent through ConnectEMC.

--enabled {true | false}

Specifies whether the channel is enabled.

--allowed-nodes <integer>...

Specifies one or more nodes that are allowed to send alerts through the channel. If you do not specify any allowed nodes, all nodes in the cluster will be allowed to send alerts. The value of <integer> is the node number you want to allow.

--clear-allowed-nodes

Clears all values for allowed nodes.

--add-allowed-nodes <integer>...

Adds one or more nodes to the allowed nodes list. The value of <integer> is the node number you want to allow.

--remove-allowed-nodes <integer>...

Removes one or more nodes from the allowed nodes list. The value of <integer> is the node number you want to remove.

--excluded-nodes <integer>...

Specifies one or more nodes that are not allowed to send alerts through the channel. The value of <integer> is the node number you want to exclude.

--clear-excluded-nodes

Clears all values for excluded nodes.

--add-excluded-nodes <integer>...

Adds one or more nodes to the excluded nodes list. The value of <integer> is the node number you want to exclude.

--remove-excluded-nodes <integer>...

Removes one or more nodes from the excluded nodes list. The value of <integer> is the node number you want to remove.

--address <string>...

For SMTP channels only. Specifies one or more email addresses you want to receive alerts on this channel. The value of <string> is an email address.

--clear-address

For SMTP channels only. Clears all values for email addresses.

--add-address <string>...

For SMTP channels only. Specifies one or more email addresses you want to add to the alert distribution list for this channel. The value of <string> is an email address.

--remove-address <string>...

For SMTP channels only. Specifies one or more email addresses you want to remove from the alert distribution list for this channel. The value of <string> is an email address.

--send-as <string>

For SMTP channels only. Specifies the email address you want to send alerts from on this channel. The value of <string> is an email address.

--subject <string>

For SMTP channels only. Specifies the subject line for emails sent on this channel.

--smtp-host <string>

For SMTP channels only. Specifies the SMTP relay host.

--smtp-port <integer>

For SMTP channels only. Specifies the SMTP relay port.

--smtp-use-auth {true | false}

For SMTP channels only. Enables or disables SMTP authentication.

--smtp-username <string>

For SMTP channels only. Specifies the username for SMTP authentication.

--smtp-password <string>

For SMTP channels only. Specifies the password for SMTP authentication.

--smtp-security {STARTTLS | NONE}

For SMTP channels only. Enables or disables SMTP encryption.

--batch {NONE | ALL | CATEGORY | SEVERITY}

For SMTP channels only. Specifies how SMTP alerts will be batched.

--batch-period <integer> <time>

For SMTP channels only. Specifies the interval between batched alerts.

The following <time> values are valid:

Y

Specifies years

M

Specifies months

W

Specifies weeks

D

Specifies days

H

Specifies hours

m

Specifies minutes

s

Specifies seconds

--host <string>

For SNMP channels only. Specifies the host name or address

--community <string>

For SNMP channels only. Specifies the community string.

{--verbose | -v}

Displays more detailed information.