PowerScale OneFS 9.3.0.0 CLI Command Reference

Syntax

isi diagnostics gather start 
  [--upload {enable | disable}]
  [--esrs {enable | disable}]
  [--gather-mode {incremental | full}]
  [--http-upload {enable | disable}]
  [--http-upload-host <host>]
  [--http-upload-path <path>]
  [--http-upload-proxy <host>]
  [--http-upload-proxy-port <port>]
  [--ftp-upload {enable | disable}]
  [--ftp-upload-host <host>]
  [--ftp-upload-path <path>]
  [--ftp-upload-proxy <host>]
  [--ftp-upload-proxy-port <port>]
  [--ftp-upload-user <username>]
  [--ftp-upload-pass <password>]
  [--set-ftp-upload-pass]

Options

--upload {enable | disable}

Enables the upload of gathered logs

--esrs {enable | disable}

Specifies EMC Secure Remote Services (ESRS) for log uploads.

--gather-mode {incremental | full}

Specifies whether you will start an incremental or full gather of logs.

--http-upload {enable | disable}

Specifies HTTP for log uploads.

--http-upload-host <host>

Specifies the HTTP site for upload.

--http-upload-path <path>

Specifies the HTTP upload directory.

--http-upload-proxy <host>

Specifies an HTTP proxy server.

--http-upload-proxy-port <port>

Specifies the HTTP proxy server port.

--ftp-upload {enable | disable}

Specifies FTP for log uploads.

--ftp-upload-host <host>

Specifies the FTP site for upload.

--ftp-upload-path <path>

Specifies the FTP upload directory.

--ftp-upload-proxy <host>

Specifies an FTP proxy server.

--ftp-upload-proxy-port <port>

Specifies the FTP proxy server port.

--ftp-upload-user <username>

Specifies the FTP site username. The default user is anonymous.

--ftp-upload-pass <password>

Specifies the FTP site password.

--set-ftp-upload-pass <password>

Sets the FTP site password.