PowerScale OneFS 9.3.0.0 CLI Administration Guide

Scan CloudPool files in a CAVA server

You can scan files in CloudPools using a CAVA configuration. Note that by default, scanning of CloudPools files is disabled to prevent the unexpected cost of file callback, and scanning Cloudpool files will trigger file reads in the cloud. To enable this setting, modify the filter and job settings.

1. Run the following command to view the status of the Scan Cloudpool files setting:

   isi antivirus cava filters view System

   Output similar to the following displays:

                    Zone: System
                 Enabled: Yes
            Open-on-fail: Yes
         File Extensions: *
   File Extension Action: include
   Scan If No Extension: No
           Exclude Paths: -
            Scan-profile: standard
            Scan-on-read: No
           Scan-on-close: Yes
          Scan-on-rename: Yes
   Scan Cloudpool Files: No
   

2. Run the following command to modify the Scan Cloudpools files setting:

   isi antivirus cava filters modify <zone> --scan-cloudpool-files true

   This command applies to access to the specified zone using file protocols only. Each scheduled job has its own setting.
3. Run the following command to modify the CAVA jobs setting:

   isi antivirus cava jobs modify <job name> --scan-cloudpool-files true