PowerScale OneFS 9.3.0.0 CLI Administration Guide

Create local users in an access zone

You can create local users for different access zones.

1. Run the isi auth users create command.
   The following commands create three users in each access zone.

   isi auth users create z1-user1 --enabled yes --password a --zone zone1
   isi auth users create z1-user2 --enabled yes --password a --zone zone1
   isi auth users create z1-user3 --enabled yes --password a --zone zone1
   isi auth users create z2-user1 --enabled yes --password a --zone zone2
   isi auth users create z2-user2 --enabled yes --password a --zone zone2 
   isi auth users create z2-user3 --enabled yes --password a --zone zone2
   isi auth users create z3-user1 --enabled yes --password a --zone zone3
   isi auth users create z3-user2 --enabled yes --password a --zone zone3
   isi auth users create z3-user3 --enabled yes --password a --zone zone3
   

2. Run the isi auth users list command to view all users created in zone1:

   isi auth users list --zone zone1
   Name
   --------
   Guest
   z1-user1
   z1-user2
   z1-user3
   root
   nobody
   --------
   Total: 6
   

   NOTE: To view users in zone2 and zone3, use the isi auth users list --zone zone2 and isi auth users list --zone zone3 commands respectively.