The
PowerProtect DP Series Appliance requires the following system requirements to configure and run.
Table 1. Supported environment and system requirements with
PowerProtect DP Series Appliance versionsThis table lists the supported environment and system requirements for various
PowerProtect DP Series Appliance versions.
Version
LDAP
Secure Connect Gateway
2.7.6
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway (Centralized configuration) 5.14.00.10 or later.
2.7.4
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway (Centralized configuration) 5.14.00.10 or later.
2.7.3
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway (Centralized configuration) 5.14.00.10 or later.
2.7.2
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway Centralized configuration) 5.14.00.10 or later.
2.7.1
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway (Centralized configuration) 5.14.00.10 or later.
2.7
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway (Centralized configuration) 5.14.00.10 or later.
2.6.1
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway (Centralized configuration) 5.14.00.10 or later.
2.6
A supported
LDAP server for Search
PowerProtect DP Series Appliance 2.6 and later versions support both Secure
LDAP and External
LDAP.
Open
LDAP 2.6 and later.
Microsoft Active Directory on Windows Server 2008 R2 and/or Windows Server 2012 R2.
If available, configure the
Secure Connect Gateway (Centralized configuration) 5.14.00.10 or later.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\