Inspiron 3181 2-in-1 Service Manual

Replacing palm rest

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. microSD card
   2. base cover
   3. battery
   4. keyboard
   5. power switch board
   6. audio
   7. power connector
   8. speaker
   9. display assembly
   10. system board
   NOTE Touchpad is not a standalone component and is assembled along with the palm rest.

   NOTE The component you are left with is the palm rest.

   
3. Install the following components on the new palm rest:
   1. system board
   2. display assembly
   3. speaker
   4. power connector
   5. audio
   6. power switch board
   7. keyboard
   8. battery
   9. base cover
   10. microSD card
4. Follow the procedure in After working inside your computer.