Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 5676 Service Manual

PDF

Procedure

NOTE For computers shipped with fan cooling, your computer may show an ePSA fan error (Error code #2000-0511) on replacing the system board . This error is due to incorrect jumper setting. Remove the jumper plug from fan-jumper pin to fix the ePSA fan error. Replacement system board is shipped with the default jumper setting, with the jumper plug on the fan-jumper pin, which is applicable only for computers shipped with liquid-cooling assembly.

To locate fan-jumper pin in your computer, go to System board components.

  1. Align the system board with the slots on the chassis and place the system board in position.
  2. Replace the eight screws (6-32UNCx6.3) that secure the system board to the chassis.
    Image: Replacing the system board
  3. Connect the USB 3.1 Type-C port cable to the system board.
  4. Connect the 2.5-inch hard-drive cable to the system board.
  5. Connect the 3.5-inch hard-drive data cable to the system board.
  6. Connect the optical-drive power cable to the system board.
  7. Connect the USB 3.1 (Type-C) cable to the system board.
  8. Connect the USB 2.0 cable to the system board.
  9. Press the securing clip and disconnect the power-supply unit cable from the system board.
  10. Connect the light-bar cable to the system board.
  11. Press the securing clip and disconnect the power-button board cable from the system board.
  12. Connect the processor-power cable to the system board.
  13. Connect the light-bar cable to the system board
  14. Connect the fan cable to the system board.
  15. Connect the front-audio cable to the system board.
    Image: Replacing the system board
  16. Place the computer in an upright position.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\