Inspiron 3910 Service Manual

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Inspiron 3910.
Component	Secured to	Screw type	Quantity	Screw image
Left-side cover	Chassis	6-32	2
Solid-state drive	System board	M2x3.5	1
Wireless card	System board	M2x4	1
Hard drive	Chassis	6-32, pan head	4
VGA-connector cover	Chassis	4-40 (captive)	2 NOTE:Only on computers shipped with 12^th Generation Intel Core i5F and 12^th Generation Intel Core i7F processors.
Power-supply unit	Chassis	#6-32, hex head	3
Optical drive	Chassis	M2x2	2
Media-card reader	Chassis	6-32, pan head	1
Front I/O-bracket	Chassis	6-32, pan head	2
Processor fan and heat-sink assembly	System board	Captive (M3)	4
System board	Chassis	6-32, hex head	8