Inspiron 3252 Service Manual

Procedure

1. Slide the ports on the system board into the slots on the back of the chassis and gently place the system board into the chassis.
2. Align the screw holes on the system board with the screw holes on the chassis.
3. Replace the screws that secure the system board to the chassis.
4. Close the front panel and align the screw hole on the front panel to the screw hole on the chassis.
5. Replace the screw that secures the front panel to the chassis.
6. Connect the power-button cable, hard-drive data cable, optical-drive data cable, and hard-drive and optical-drive power cable to the system board.