Inspiron 3020 Desktop Service Manual

Installing the memory

If you are replacing a component, remove the existing component before performing the installation process.

NOTE:Up to two memory modules may be installed into this computer.

The following image(s) indicate the location of the memory and provides a visual representation of the installation procedure.

Installing the memory

Align the notch on the memory module with the tab on the memory-module slot.
Insert the memory module into the memory-module slot.
Press down on the memory module until the memory module snaps into position and the securing clip locks in place.
CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module.
NOTE:The securing clips return to the locked position. If you do not hear the click, remove the memory module and reinstall it.
NOTE:If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the slot.
Place the computer in an upright position.