Inspiron 24 3000 All-in-One Service Manual

Procedure

Disconnect the camera cable from the system board.
Remove the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base.
Slide and lift the retractable-camera assembly out of the display-assembly base.
Note the routing of the camera cable, and remove it from the routing guides.
Press the top of the retractable-camera assembly to extend the retractable camera.
Remove the three screws (M3x5) that secure the retractable-camera bezel to the retractable-camera assembly.
Lift the retractable-camera bezel off the retractable-camera assembly.
Pull the clip on the retractable-camera assembly, and rotate the camera and camera bracket along with the camera cable, off the retractable-camera assembly.