Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 24 3000 All-in-One Service Manual

PDF

Procedure

  1. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer:
    Table 1. Antenna-cable color scheme .

    The following table lists connectors on the wireless card and the color scheme of the antenna cable.

    Connectors on the wireless card Antenna cable color
    Auxiliary (black triangle) Black
    Main (white triangle)White
  2. Slide the wireless-card bracket onto the wireless card and secure the antenna cables with the wireless-card bracket.
  3. Align the notch on the wireless card with the tab on the wireless-card slot, and then insert the wireless card into the wireless-card slot on the system board.
  4. Press down the other end of the wireless card, and then align the screw hole on the wireless-card bracket and wireless card with the screw hole on the system board.
  5. Replace the screw that secures the wireless-card bracket and the wireless card to the system board. Image: Replacing the wireless card
  6. Place the wireless-card shield on top of the wireless card.
    • NOTE: There is a cut-out on the wireless-card shield for the antenna cables to come out.
  7. Align the screw holes on the wireless-card shield with the screw holes on the system board.
  8. Replace the two screws (M2x2.5) that secure the wireless-card shield to the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\