Inspiron 24 3000 Service Manual

Procedure

Using the alignment posts and rubber grommets on the display bezel, place the speakers on the display bezel.
Route the speaker cable through the routing guide on the display bezel.
Adhere the tape that secures the speaker cable to the VESA-mount bracket.
Replace the screw to the VESA-mount bracket.
Replace the rubber grommets if they are pushed up while replacing the speakers.
Route the speaker cable connecting the left speaker to the right speaker on the display-panel base.
Route and replace the speaker cable under the VESA-mount bracket.
Connect the speaker cable to the system board.