Inspiron 7586 Service Manual

Procedure

Remove the six screws (M2x5) that secure the base cover to the palm-rest assembly.
Loosen the three captive screws that secure the base cover to the palm-rest assembly.
Using a plastic scribe, pry the base cover from the tabs on the hinges and continue to pry the base cover from the slots on the palm-rest assembly.
- CAUTION: Do not pry the base cover from the middle as it might damage the chassis.
Carefully remove the base cover off the palm-rest assembly.
- NOTE: The following step is applicable only if you want to further remove any other component from your computer.
Disconnect the battery cable from the system board.