Inspiron 15 7000 2-in-1 Service Manual

Procedure

1. Disconnect the fan cable from the system board.
2. Peel off the tapes that secure the display cable and touch-screen board cable to the system board.
3. Open the latches and disconnect the display cable and the touch-screen board cable from the system board.
4. Peel off the tape that secures the I/O-board cable to the system board.
5. Open the latch and disconnect the I/O-board cable from the system board.
   
6. Using the pull tab, disconnect the hard-drive cable from the system board.
7. Open the latch and disconnect the touchpad cable from the system board.
8. Disconnect the power-adapter port cable from the system board.
9. Remove the two screws (M2x3) that secure the USB Type-C port bracket to the system board and palm-rest assembly.
10. Lift the USB Type-C port bracket off the system board.
11. Disconnect the speaker cable from the system board.
12. Open the latch and disconnect the status-light board cable from the system board.
13. Open the latch and disconnect the keyboard cable from the system board.
14. Open the latch and disconnect the keyboard-backlight cable from the system board.
    
15. Remove the four screws (M2x2) that secure the system board to the palm-rest assembly and keyboard shield.
16. Lift the system board off the palm-rest assembly.