Inspiron 5585 Service Manual

Procedure

1. Peel off the tape that secures the I/O-board cable to the I/O board.
2. Note the routing and remove the I/O-board cable from the routing guides.
3. Peel off the tape that secures the display cable to the display cable connector.
4. Open the latch and disconnect the display cable from the system board.
5. Remove the display cable from the routing guide.
   
6. Remove the five screws (M2.5x5) that secure the display hinges to the palm-rest and keyboard assembly.
7. Open the display at an angle of 90 degrees.
   
8. Lift the display assembly off the palm-rest and keyboard assembly.