Inspiron 5583 Service Manual

Procedure

1. Lift the latch and disconnect the optical-drive connector-board cable from the optical-drive board connector.
2. Peel the tape that secures the display-cable connector latch to the system board.
3. Open the latch and disconnect the display cable from the system board.
4. Note the routing of the display cable and remove the cable from its routing guides on the fan and palm-rest and keyboard assembly.
5. Remove the six screws (M2.5x5) that secure the left and right hinges to the system board and palm-rest and keyboard assembly.
6. Open the hinges.
   
7. Lift the palm-rest and keyboard assembly at an angle.
8. Slide and remove the palm-rest and keyboard assembly off the display assembly.
   
9. After performing all the above steps, you are left with display assembly.