Inspiron 5580 Service Manual

PDF

System setup options

NOTE: : Depending on this computer and its installed devices, the items listed in this section may or may not appear.

Table 1. System setup options—System information menu
The following table describes the System information menu options in the System setup program.
General
	System Information
	BIOS Version	Display the BIOS version number.
	Service Tag	Display the Service Tag of the computer.
	Asset Tag	Display the Asset Tag of the computer.
	Ownership Tag	Display the Ownership Tag of the computer.
	Manufacture Date	Display the manufacture date of the computer.
	Ownership Date	Display the ownership date of the computer.
	Express Service Code	Display the express service code of the computer.
	Memory Information
	Memory Installed	Display the total computer memory installed.
	Memory Available	Display the total computer memory available.
	Memory Speed	Display the memory speed.
	Memory Channel Mode	Display single or dual channel mode.
	Memory Technology	Display the technology used for the memory.
	DIMM A Size	Display the DIMM A memory size.
	DIMM B Size	Display the DIMM B memory size.
	Processor Information
	Processor Type	Display the processor type.
	Core Count	Display the number of cores on the processor.
	Processor ID	Display the processor identification code.
	Current Clock Speed	Display the current processor clock speed.
	Minimum Clock Speed	Display the minimum processor clock speed.
	Maximum Clock Speed	Display the maximum processor clock speed.
	Processor L2 Cache	Display the processor L2 Cache size.
	Processor L3 Cache	Display the processor L3 Cache size.
	HT Capable	Display whether the processor is HyperThreading (HT) capable.
	64-Bit Technology	Display whether 64-bit technology is used.
	Device Information
	SATA-0	Display the SATA-0 device information of the computer.
	SATA-2	Display the SATA-2 device information of the computer.
	M.2 PCIe SSD-0	Display the M.2 PCIe SSD device information of the computer.
	LOM MAC Address	Display the LAN On Motherboard (LOM) MAC address of the computer.
	Video Controller	Display the video controller type of the computer.
	dGPU Video Controller	Display the discrete graphics information of the computer.
	Video BIOS Version	Display the video BIOS version of the computer.
	Video Memory	Display the video memory information of the computer.
	Panel Type	Display the Panel Type of the computer.
	Native Resolution	Display the native resolution of the computer.
	Audio Controller	Display the audio controller information of the computer.
	Wi-Fi Device	Display the wireless device information of the computer.
	Bluetooth Device	Display the Bluetooth device information of the computer.
	Battery Information	Display the battery information of the computer.
	Boot Sequence
	Boot Sequence	Display the boot sequence.
	Boot List Option	Display the available boot options.
	Advanced Boot Options
	Enable Legacy Option ROMs	Enable or disable the Legacy Option ROMs.
	UEFI Boot Path Security	Control the prompt for the user to enter the Admin password (if set) when booting a UEFI boot path from the F12 Boot Menu.
	Date/Time	Display the current date in MM/DD/YY format and current time in HH:MM:SS AM/PM format.

Table 2. System setup options—System Configuration menu
The following table describes the System Configuration menu options in the System setup program.
System Configuration
	Integrated NIC	Control the on-board LAN controller.
	Enable UEFI Network Stack	Enable or disable UEFI Network Stack.
	SATA Operation	Configure operating mode of the integrated SATA hard drive controller.
	Drives	Enable or disable various drives on board.
	SMART Reporting	Enable or disable Self-Monitoring, Analysis, and Reporting Technology (SMART) during system startup.
	USB Configuration
	Enable Boot Support	Enable or disable booting from USB mass storage devices such as external hard drive, optical drive, and USB drive.
	Enable External USB Port	Enable or disable booting from USB mass storage devices connected to external USB port.
	Audio	Enable or disable the integrated audio controller.
	Keyboard Illumination	Select the operating mode of the keyboard illumination feature.
	Keyboard Backlight Timeout on AC	Select the timeout value for the keyboard backlight when an AC adapter is plugged into the system.
	Keyboard Backlight Timeout on Battery	Select the timeout value for the keyboard backlight when the system is running only on battery power.
	Miscellaneous Devices	Enable or disable various onboard devices.
	Enable Camera	Enable or disable the camera.

Table 3. System setup options—Video menu
The following table describes the Video menu options in the System setup program.
Video
	LCD Brightness	Set the panel brightness independently for Battery and AC power.

Table 4. System setup options—Security menu
The following table describes the Security menu options in the System setup program.
Security
	Admin Password	Set, change, or delete the administrator password.
	System Password	Set, change, or delete the system password.
	Internal HDD-2 Password	Set, change, or delete the internal hard-disk drive password.
	Strong Password	Enable or disable strong passwords.
	Password Configuration	Control the minimum and maximum number of characters allowed for the Admin and System passwords.
	Password Bypass	Bypass the System (Boot) Password and the internal HDD password prompts during a system restart.
	Password Change	Enable or disable changes to the System and Hard Disk passwords when an administrator password is set.
	Non-Admin Setup Changes	Determine whether changes to the setup option are permitted when an administrator password is set.
	UEFI Capsule Firmware Updates	Enable or disable BIOS updates through UEFI capsule update packages.
	PTT Security	Enable or disable Platform Trust Technology (PTT) visibility to the operating system.
	Computrace(R)	Enable or disable the BIOS module interface of the optional Computrace(R) Service from Absolute Software.
	Admin Setup Lockout	Enable to prevent users from entering Setup when an Admin Password is set.
	Master Password Lockout	Disable the master password support.
	SMM Security Mitigation	Enable or disable additional UEFI SMM Security Mitigation protections.

Table 5. System setup options—Secure Boot menu
The following table describes the Secure Boot menu options in the System setup program.
Secure Boot
	Secure Boot Enable	Enable or disable the secure boot feature.
	Secure Boot Mode	Select the operating mode to allow evaluation or enforcement of UEFI driver signatures.
	Expert Key Management
	Enable Custom Mode	Enable or disable custom mode.
	Expert Key Management	Enable or disable Expert Key Management.
	Custom Mode Key Management	Select the custom values for expert key management.

Table 6. System setup options—Intel Software Guard Extensions menu
The following table describes the Intel Software Guard Extensions menu options in the System setup program.
Intel Software Guard Extensions
	Intel SGX Enable	Enable or disable Intel Software Guard Extensions.
	Enclave Memory Size	Set the Intel Software Guard Extensions Enclave Reserve Memory Size.
Performance
	Multi Core Support	Enable multiple cores. Default: Enabled.
	Intel SpeedStep	Enable or disable Intel Speedstep Technology. Default: Enabled. NOTE: : If enabled, the processor clock speed and core voltage are adjusted dynamically based on the processor load.
	C-States Control	Enable or disable additional processor sleep states. Default: Enabled.
	Intel TurboBoost	Enable or disable Intel TurboBoost mode of the processor. Default: Enabled.
	HyperThread Control	Enable or disable HyperThreading in the processor. Default: Enabled.
Power Management
	AC Behavior	Enable the system to turn on automatically, when AC is inserted.
	Enable Intel Speed Shift Technology	Enable or disable the operating system to select the appropriate processor performance automatically.
	Auto On Time	Enable to set the computer to turn on automatically every day or on a preselected date and time. This option can be configured only if the Auto On Time is set to Everyday, Weekdays, or Selected Days. Default: Disabled.
	USB Wake Support	Enable the USB devices to wake the computer from Standby.
	Wake on LAN/WLAN	Select the option to power up from the off state when triggered by a special LAN signal or from the hibernate state when triggered by a special wireless LAN signal.
	Block Sleep	Select the mode to block entering to sleep in the OS environment.
	Advanced Battery Charge Configuration	Enable Advanced Battery Charge Configuration from the beginning of the day to a specified work period.
	Primary Battery Charge Configuration	Set the primary battery charge settings with a preselected custom charge start and stop. Default: Adaptive.
POST Behavior
	Adapter Warnings	Enable adapter warnings. Default: Enabled.
	Fn Lock Options	Enable or disable the Fn lock mode.
	Fastboot	Enable to set the speed of the boot process. Default: Thorough.
	Extend BIOS POST Time	Set the BIOS POST time.
	Full Screen Logo	Display full screen logo.
	Warning and Errors	Control the boot process to only pause when warnings or errors are detected.
	MAC Address Pass-Through	Replace the external NIC MAC address (in a supported dock or dongle) with the selected MAC address from the system.

Table 7. System setup options—Virtualization Support menu
The following table describes the Virtualization Support menu options in the System setup program.
Virtualization Support
	Virtualization	Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization Technology.
	VT for Direct I/O	Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization Technology for Direct I/O.

Table 8. System setup options—Wireless menu
The following table describes the Wireless menu options in the System setup program.
Wireless
	Wireless Switch	Determine which wireless devices can be controlled by the Wireless Switch.
	Wireless Device Enable	Enable or disable internal wireless devices.

Table 9. System setup options—Maintenance menu
The following table describes the Maintenance menu options in the System setup program.
Maintenance
	Service Tag	Display the system’s Service Tag.
	Asset Tag	Create a system Asset Tag.
	BIOS Downgrade	Control flashing of the system firmware to previous revisions.
	Data Wipe	Enable to securely erase data from all internal storage devices.
	BIOS Recovery	Enable the user to recover from certain corrupted BIOS conditions from a recovery file on the user primary hard drive or an external USB key.

Table 10. System setup options—System Logs menu
The following table describes the System Logs menu options in the System setup program.
System Logs
	BIOS Events	Display BIOS events.
	Thermal Events	Display the Thermal events.
	Power Events	Display the Power events.

Table 11. System setup options—SupportAssist System Resolution menu
The following table describes the SupportAssist System Resolution menu options in the System setup program.
SupportAssist System Resolution
	Auto OS Recovery Threshold	Control the automatic boot flow for SupportAssist System Resolution Console and for the Dell OS Recovery tool.
	SupportAssist OS Recovery	Enable or disable the boot flow for the SupportAssist OS Recovery tool when certain system errors.