Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 15 5510 Service Manual

PDF

Removing the display assembly

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Enter Service Mode.
  3. Remove the base cover.

About this task

The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.

Disconnect display cable and remove screws securing hinges

Gently slide the palm-rest and keyboard assembly off the display assembly carefully

Display assembly

Steps

  1. Peel the tape that secures the display cable to the system board.
  2. Open the latch and disconnect the display cable from the system board.
  3. Remove the three (M2.5x4) screws that secure the left-display hinge to the system board.
  4. Remove the three (M2.5x4) screws that secure the right-display hinge to the system board.
  5. Open the display hinges at an angle of 90 degrees.
  6. Gently slide the palm-rest and keyboard assembly off the display assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\