Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 15 3000 Service Manual

PDF

Procedure

  1. Remove the screw (2.5x8) that secure the display hinge to the palm-rest assembly.
    • NOTE: These instructions are applicable only for laptops with a non-touch screen display.
  2. Open the hinge to an angle of 90 degrees.Image: Removing the system board
  3. Peel the tape that secures the display cable to the system board.
  4. Open the latch and disconnect the display cable from the system board.
  5. Open the latch and disconnect the power-button board cable from the system board.
  6. Open the latch and disconnect the hard-drive cable from the system board.
  7. Open the latch and disconnect the I/O-board cable from the system board.
  8. Disconnect the speaker cable from the system board.
  9. Open the latch and disconnect the touch-pad cable from the system board. Image: Disconnecting cables
  10. Remove the two screws (M2x3) that secures the system board to the palm-rest assembly.
  11. Gently release the ports on the system board from the slots on the palm-rest assembly.
  12. Carefully turn the system board over.Image: Removing the system board
  13. Peel the tape that secures the power-adapter port cable to the system board and disconnect the power-adapter port from the system board.
  14. Lift the system board off the palm-rest assembly.Image: Removing the system board

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\