|
Integrated NIC
|
Enables or disables the on-board LAN controller.
Default: Enabled
|
|
USB Emulation
|
Enables or disables the USB emulation feature. This feature defines how the BIOS, in the absence of a USB-aware operating system, handles USB devices. USB emulation is always enabled during POST.
NOTE:You cannot boot any type of USB device (floppy, hard drive, or memory key) when this option is off.
Default: Enabled
|
|
USB PowerShare
|
Enables or disables the USB PowerShare feature. This feature
allows the user to charge USB devices cellular phones, portable music players, and so on
when the system is on battery power.
Default: Enabled
|
|
SATA Operation
|
Allows you to configure the operating mode of the integrated SATA hard drive controller.
Default: AHCI
|
|
Adapter Warnings
|
Allows you to choose if the computer should display warning messages when you use AC adapters that are not supported by your computer.
Default: Enabled
|
|
Function Key Behavior
|
Allows you to set function key or multimedia key as the default function key behavior.
Default: Multimedia key
|
|
Keyboard Illumination
|
Selects the operating mode of the keyboard illumination feature.
Default: Dim
|
|
Keyboard Backlight with AC
|
Selects the timeout value for the keyboard backlight when an AC adapter is plugged into the computer.
Default: 1 minute
|
|
Keyboard Backlight with Battery
|
Selects the timeout value for the keyboard backlight when the computer is running on battery power.
Default: 1 minute
|
|
Battery Health
|
Displays the battery health.
|
|
Camera
|
Enables or disables the camera.
Default: Enabled
|
|
Battery Charge Configuration
|
Set the battery charge settings with a preselected custom charge start and stop.
Default: Adaptive
|
|
Advanced Battery Charge Configuration
|
Enable Advanced Battery Charge Configuration from the beginning of the day to a specified work period.
Default: Disabled
|
|
IPv4 HTTP Support
|
Default: Disabled
|
|
IPv6 HTTP Support
|
Default: Disabled
|
|
Power Option
|
|
|
Maintenance
|
|
|
Data Wipe on next boot
|
Enables or disables data wipe on the next boot.
Default: Disabled
|
|
BIOS Recovery from Hard Drive
|
Enables the user to recover from certain corrupted BIOS conditions from a recovery file on the user primary hard drive or an external USB key.
|
|
BIOS Auto-Recovery
|
Enables BIOS to automatically recover BIOS without user actions.
Default: Disabled
|
|
SupportAssist System Resolution
|
|
Auto OS Recovery Threshold
|
Controls the automatic boot flow for SupportAssist System Resolution Console and for the Dell OS Recovery tool.
Default: 2
|
|
SupportAssist OS Recovery
|
Enables or disables the boot flow for the SupportAssist OS Recovery tool in the even of certain system errors.
Default: Disabled
|
|
CPU TCC offset
|
Default: (0)
|