Inspiron 14 7420 2-in-1 Service Manual

Removing the base cover

NOTE:Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer.

The following images indicate the location of the base cover and provide a visual representation of the removal procedure.

Image: Base cover 1

Image: Base cover 2

Image: Base cover 3

Remove the four screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly.
NOTE:Upon loosening the captive screws, the base cover will open up creating a gap between the base cover and the palm-rest assembly at the hinges.
Starting from the top-left corner at the hinge, pry the base cover to release the base cover from the palm-rest and keyboard assembly.
Peel the tape that secures the battery cable to the system board and disconnect the battery cable from the system board.