|
PowerNow! Enable |
Enables or disables
the dynamic frequency scaling and power-saving technology for the AMD processor. Default: Enabled |
|
Virtualization |
Enables or disables the Virtualization technology. Default: Enabled |
|
Integrated NIC |
Enables or disables the on-board LAN controller. Default: Enabled |
|
USB Emulation |
Enables or disables the USB emulation feature. This feature defines
how the BIOS, in the absence of a USB-aware operating system, handles
USB devices. USB emulation is always enabled during POST. NOTE You cannot boot any
type of USB device (floppy, hard drive, or memory key) when this option
is off. Default: Enabled |
|
USB Wake Support |
Allows
you to enable USB devices to wake the computer from standby or to
disable the USB wake support feature. NOTE If USB PowerShare is
enabled, a device connected to the USB PowerShare connector may not
wake the computer. Default: Disabled |
|
SATA Operation |
Allows
you to configure the operating mode of the integrated SATA hard drive
controller. Default: AHCI |
|
Adapter Warnings |
Allows
you to choose if the computer should display warning messages when
you use AC adapters that are not supported by your computer. Default: Enabled |
|
Function Key Behavior |
Allows
you to set function key or multimedia key as the default function
key behavior. Default: Multimedia key |
| Keyboard Illumination | Selects the operating mode of the keyboard illumination feature. Default: Bright |
| Keyboard Backlight with AC | Selects the timeout value for the keyboard backlight when an AC adapter is plugged into the computer. Default: 1 minute |
| Keyboard Backlight with Battery | Selects the timeout value for the keyboard backlight when the computer is running on battery power. Default: 1 minute |
| Express Charge | Selects the battery charge mode. Default: Express Charge |
| Battery Health | Displays
the battery health. |
|
Camera |
Enables or disables the camera. Default: Disabled |
| Battery Charge Configuration | Set
the battery charge settings with a preselected custom charge start
and stop. Default: Adaptive |
| Advanced
Battery Charge Configuration | Enable Advanced Battery Charge Configuration
from the beginning of the day to a specified work period. Default: Disabled |
| Sleep Mode | Selects the power-saving state when your computer is idle. Default: OS Automatic Selection |
| Maintenance | |
| Data Wipe on next boot | Enables or disables data wipe on the next boot. Default: Disabled |
|
BIOS Recovery from Hard Drive |
Enables the user to recover from certain
corrupted BIOS conditions from a recovery file on the user primary
hard drive or an external USB key. |
|
BIOS Auto-Recovery |
Enables BIOS
to automatically recover BIOS without user actions. Default: Disabled |
|
SupportAssist System
Resolution |
|
Auto OS Recovery Threshold |
Controls
the automatic boot flow for SupportAssist System Resolution Console
and for the Dell OS Recovery tool. Default: 2 |
|
SupportAssist OS Recovery |
Enables
or disables the boot flow for the SupportAssist OS Recovery tool in
the even of certain system errors. Default: Disabled |