Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 5485 2-in-1 Service Manual

PDF

Procedure

  1. Peel off the tape that secures the fan cable to the palm-rest and keyboard assembly.
  2. Disconnect the fan cable from the system board.
  3. Open the latch, and disconnect the I/O cable from the system board.
  4. Peel off the tape that secures the touchscreen cable and the display cable to their respective connectors on the system board.
  5. Open the latch, and disconnect the touchscreen cable from the system board.
  6. Open the latch, and disconnect the display cable from the system board.
    Image: Disconnecting the cables from the system board
  7. Turn the computer over, and open the display as far as possible. Then place the computer face down on a flat surface.
    CAUTION Place the computer on a soft and clean surface to avoid scratching the display.
  8. Remove the antenna cables from the routing guides on the palm-rest and keyboard assembly.
  9. Remove the six screws (M2.5x5) that secure the display assembly to the palm-rest and keyboard assembly.
  10. Gently lift the display assembly off the palm-rest and keyboard assembly.
    Image: Removing the display assembly

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\