Inspiron 14 3000 Service Manual

Procedure

Slide and replace the touch pad into its slot on the palm-rest assembly.
Align the screw holes on the touch-pad board with the screw holes on the palm-rest assembly.
Replace the six screws (M2x3) that secure the touch-pad board to the palm-rest assembly.
Slide the touch-pad bracket at an angle and align the screw hole on the touch-pad bracket with the screw hole on the palm-rest assembly.
Replace the screw (M2x3) that secures the touch-pad bracket to the palm-rest assembly.
Adhere the tapes that secure the touch-pad board to the palm-rest assembly and cover the tapes with the transparent film.
Connect the touch-pad cable to its connector and close the latch.