Inspiron 7391 2n1 Service Manual

Procedure

1. Align the screw holes on the keyboard with the screw holes on the palm-rest assembly.
2. Replace the 4 screws (M1.2x1.8) that secure the keyboard to palm-rest assembly.
   
3. Align the screws holes on the keyboard bracket with the screw holes on the keyboard.
4. Replace the 29 screws (M1.2x1.8) that secure the keyboard bracket to keyboard.
   
5. Replace the plastic sheet on the keyboard bracket.
6. Adhere the tapes that secure the antenna cables to the keyboard bracket.
7. Adhere the fingerprint-reader cable to the keyboard bracket.