Inspiron 13 7000 2-in-1 Service Manual

Procedure

1. Place and align the screw holes on the I/O board with the screw hole on the palm-rest assembly and the screw hole on the keyboard bracket.
2. Replace the two screws (M2x2) that secure the I/O board to the keyboard bracket.
   
3. Connect the coin-cell battery cable to the I/O board.
4. Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable.
5. Adhere the adhesive tape covering the I/O-board cable connector on the I/O board.