Inspiron 13 7000 2-in-1 Service Manual

Procedure

1. Remove the antenna cables from the routing guides on the palm-rest assembly.
2. Peel off the adhesive tapes that secure the display cable and touchscreen-board cable to the system board.
3. Open the latch and disconnect the display cable from the system board.
4. Open the latch and disconnect the touchscreen-board cable from the system board.
   
5. Turn the computer over and open the display as far as possible. Then place the computer face down on a flat surface.
   CAUTION Place the computer on a soft and clean surface to avoid scratching the display.
6. Remove the six screws (M2.5x5) that secure the display assembly to the palm-rest assembly.
7. Gently lift the display assembly off the palm-rest assembly.