Inspiron 13 7000 2-in-1 Service Manual

Procedure

1. Align the screw holes on the touchpad with the screw holes on the palm-rest assembly.
2. Replace the four screws (M2x2.5) that secure the touchpad to the palm-rest assembly.
   
3. Align the screw holes on the touchpad bracket with the screw holes on the palm-rest assembly.
4. Replace the three screws (M2x2.5) that secure the touchpad bracket to the palm-rest assembly.
5. Adhere the two adhesive tapes that secure the touchpad to the keyboard bracket.
6. Slide the touchpad cable into the connector on the system board and close the latch to secure the touchpad cable.