- Notes, cautions, and warnings
- Safety instructions
- Removing and installing components
- Device drivers
- System setup
- Troubleshooting
- Getting help and contacting Dell
M-BIST (Built-In Self-Test) | L-BIST (LCD Built-In Self-Test) | |
---|---|---|
Purpose of diagnostic tool | Evaluates the health of the system board, allowing users to assess whether the system board is the source of the problem if there is no power, no video output, or if the system does not start-up properly (no POST). | Checks if the system board is supplying power to the LCD display by performing an LCD Power Rail test, which allows for isolation of "No Video" symptom to Mainboard, LCD or Cable. |
Trigger | Pressing M key and power button | Pressing D key and power button. Also automatically initiated during POST. Automatically initiated during POST |
Indicator of fault | Amber colored battery indicator LED | Battery indicator LED blink error code [Amber, White] = [2,8] |
Repair instruction | Indicates a problem with the system board. | Indicates a problem with the system board. |