Inspiron 13 5000 2-in-1 Service Manual

Procedure

1. Open the latch and disconnect the touchpad cable from the system board.
2. Peel the tapes that secure the touchpad to the palm-rest assembly.

   

   1. palm-rest assembly
   2. tape
   3. latch
   4. system board
   5. touchpad cable

3. Open the latch and disconnect the touchpad cable from the system board.
4. Remove the four screws (M2x2) that secure the touchpad to the palm-rest assembly.
5. Lift and slide the touchpad off the palm-rest assembly.

   

   1. screws (4)
   2. touchpad
   3. palm-rest assembly
   4. touchpad cable
   5. system board