Inspiron 13 5000 2-in-1 Service Manual

Procedure

1. Align the screw holes on the system board with the screw holes on the palm-rest assembly.
2. Replace the three screws (M2x2 Big Head) that secures the system board to the palm-rest assembly.
3. Slide the I/O-board cable into the system-board connector close the latch to secure the cable.
4. Adhere the tape that secures the I/O-board cable to the system board.
5. Connect the power-adapter port-cable and the speaker cable to the system board.
6. Connect the hard-drive cable to the system board.
7. Slide the display cable and the touch-screen board-cable into their respective connectors and close the latches to secure the cables.
8. Adhere the tape that secures the display cable and touch-screen board-cable to the system board.