iDRAC9 Version 7.00.00.00 Release Notes

PDF

Automation — API and CLI

Table 1. iDRAC firmware update failure iDRAC firmware update through Redfish may fail an error message is displayed "400 BadRequest-InstanceID for operation is Invalid" while the system is under performance stress.
Description	iDRAC firmware update through Redfish may fail an error message is displayed "400 BadRequest-InstanceID for operation is Invalid" while the system is under performance stress.
Workaround	Retry the update operation.
Systems Affected	All systems supported by this release
Tracking number	263709

Table 2. Redfish Validator error Running schema validator to check schema conformance may display an error about NetworkAttributeRegistry instance that the JSON does not match the required URIs in Schema of AttributeRegistry.
Description	Running schema validator to check schema conformance may display an error about NetworkAttributeRegistry instance that the JSON does not match the required URIs in Schema of AttributeRegistry.
Workaround	N/A
Systems Affected	All systems supported by this release
Tracking number	268459

Table 3. GET method on Port collection returning incorrect information Adding the filter query parameter with "ne" for GET method on the Ports collection URI returns incorrect details.
Description	GET method on the Ports collection URI with a filter query parameter that includes "ne" operator returns incorrect details.
Workaround	N/A
Systems Affected	All systems supported by this release
Tracking number	261094

Table 4. Expand query fails Expand query parameter may fail for a few resources while just GET method works as expected.
Description	Expand query parameter may fail for a few resources while just GET method works as expected.
Workaround	N/A
Systems Affected	All systems supported by this release with external enclosures.
Tracking number	261043

Table 5. Smart NIC/DPU certificate information not displayed SmartNIC or DPU Secureboot certificates are not displaying in the response when GET is performed on Redfish certificate URI right after DPU/NIC was restarted.
Description	SmartNIC or DPU Secureboot certificates are not displaying in the response when GET is performed on Redfish certificate URI right after DPU/NIC was restarted.
Workaround	N/A
Systems Affected	All systems supported by this release
Tracking number	25844/257322

Table 6. System not powering on after Chassis reset action After a chassis reset that is performed through Redfish, if the ResetType is set to PowerCycle, then system may power off and fail to power on automatically.
Description	After a chassis reset that is performed through Redfish, if the ResetType is set to PowerCycle, then system may power off and fail to power on automatically.
Workaround	Power on the system using any iDRAC interface.
Systems Affected	All systems supported by this release
Tracking number	234900

Table 7. Server reboots while applying device firmware update While applying firmware update through Redfish interface for a device that does not require a reboot for the update, setting @Redfish.OperationApplyTime property to Immediate in the request body may cause the server to reboot.
Description	While applying firmware update through Redfish interface for a device that does not require a reboot for the update, setting @Redfish.OperationApplyTime property to Immediate in the request body may cause the server to reboot.
Workaround	N/A
Systems Affected	All systems supported by this release
Tracking number	233764

Table 8. RLCE reports Incorrect value for fan sensor Redfish Life Cycle Events may report incorrect data for fan sensor URI after a hot pluggable fan is removed.
Description	Redfish Life Cycle Events may report incorrect data for fan sensor URI after a hot pluggable fan is removed.
Workaround	Restart the host system.
Systems Affected	All systems supported by this release.
Tracking number	193777

Table 9. Service Validator reporting errors for Redfish API services To continue support firmware backward compatible, you may get errors for Redfish API services in the Service Validator. They do not have any functional impact on the system and may be ignored.
Description	To continue support firmware backward compatible, you may get errors for Redfish API services in the Service Validator. They do not have any functional impact on the system and may be ignored.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	183321

Table 10. Performing GET with Top query parameter returns no error Top query on a Parity URI instance returns complete response instead of an error code.
Description	Top query on a Parity URI instance returns complete response instead of an error code.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	175801

Table 11. Uploaded firmware link not available in SoftwareImages property While performing GET method on BIOS or Manager Schema through Redfish, the SoftwareImages property may not display the uploaded firmware link.
Description	While performing GET method on BIOS or Manager Schema through Redfish, the SoftwareImages property may not display the uploaded firmware link.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	156737

Table 12. Attributes for CNA cards not displayed through Redfish or RACADM interface If the partitions are disabled on FCoE capable CNA cards, few HII attributes values for WWN, VirtWWN, WWPN, VirtWWPN are displayed in the iDRAC GUI's Network page. However, the same data is not displayed when Get commands are performed in Redfish and RACADM interfaces.
Description	If the partitions are disabled on FCoE capable CNA cards, few HII attributes values for WWN, VirtWWN, WWPN, VirtWWPN are displayed in the iDRAC GUI's Network page. However, the same data is not displayed when Get commands are performed in Redfish and RACADM interfaces.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	151560

Table 13. Unable to create a recurring job after same job was completed Creating a recurring job will fail if the same job was completed recently and its Task ID still exists.
Description	Creating a recurring job will fail if the same job was completed recently and its Task ID still exists.
Workaround	Wait for ten minutes for the Task ID to be deleted.
Systems Affected	All systems supported by this release.
Tracking number	147501

Table 14. Get operation not displaying model or serial number for PCIe devices If you perform a Get operation for a PCIe device using Redfish API, the response may not display the model and serial number of the device.
Description	If you perform a Get operation for a PCIe device using Redfish API, the response may not display the model and serial number of the device.
Workaround	N/A
Systems Affected	All systems supported by this release.
Tracking number	111564