Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

iDRAC9 Version 6.10.00.00 Release Notes

PDF

Networking and IO

Table 1. HWC8010 error after installing a DPU card Server may report the error "HWC8010: Configuration error: Add-in card in slot x" after the server is restarted post a DPU card installation.
Description Server may report the error "HWC8010: Configuration error: Add-in card in slot x" after the server is restarted post a DPU card installation.
Workaround Ensure that the DPU card is installed in the PCIe Slot 1 in PowerEdge R650 and in Slot 2 in PowerEdge R750.
Systems Affected PowerEdge R650 and PowerEdge R750
Tracking number 232953
Table 2. Unable to add iDRAC Static IP After setting iDrac static IP using IPV4 group (IPv4.1.Address, IPv4.1.Gateway,IPv4.1.Netmask) using Redfish or RACADM interface, a new IP address may not apply and system may become inaccessible.
Description After setting iDrac static IP using IPV4 group (IPv4.1.Address, IPv4.1.Gateway,IPv4.1.Netmask) using Redfish or RACADM interface, a new IP address may not apply and system may become inaccessible.
Workaround Use the IPV4Static group (IPv4Static.1.Address, IPv4Static.1.Gateway,IPv4Static.1.Netmask) to set static IP address.
Systems Affected All systems supported by this release.
Tracking number 185458
Table 3. Partial information displayed for Mellanox Cards iDRAC interfaces only display partial information for the Mellanox network cards, such as, in InfiniBand mode the card is displayed as a NIC device. Also, no board manufacturer and version is available.
Description iDRAC interfaces only display partial information for the Mellanox network cards, such as, in InfiniBand mode the card is displayed as a NIC device. Also, no board manufacturer and version is available.
Workaround N/a
Systems Affected All systems supported by this release.
Tracking number 179265
Table 4. NIC or FC device slot listed in hardware inventory even when disabled in BIOS For some NIC or FC cards, even if the device slot is disabled in BIOS, the slot may still get listed in the hardware inventory.
Description For some NIC or FC cards, even if the device slot is disabled in BIOS, the slot may still get listed in the hardware inventory.
Workaround N/A
Systems Affected All systems supported by this release.
Tracking number 104535

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\