Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

iDRAC9 Version 6.10.30.00 Release Notes

PDF

Miscellaneous

Table 1. Lifecycle Controller RSOD screen When a firmware update operation for a component(s) is combined with the Dell NVMe Switch backplane update, the subsequent firmware update job in sequence that follows the backplane update may fail with an RSOD in the Lifecycle Controller console.
Description When a firmware update operation for a component(s) is combined with the Dell NVMe Switch backplane update, the subsequent firmware update job in sequence that follows the backplane update may fail with an RSOD in the Lifecycle Controller console.
Workaround Perform any of the following:
  • · Update each component, one at a time.
  • · Update a specific combination of firmware components that would not result in the RSOD. For example, combine the Dell NVMe backplane update with any PLDM-based firmware update component job, such as Backplane and BIOS or BIOS and NIC cards.
Systems Affected All 15th Generation of PowerEdge servers supported by this release that are configured with Dell NVMe Switch backplane.
Tracking number 257722
Table 2. Japanese keyboard special characters not responding In Virtual Console on-screen keyboard, some special characters in Japanese do not respond in Windows or Linux operating systems.
Description In Virtual Console on-screen keyboard, some special characters in Japanese do not respond in Windows or Linux operating systems.
Workaround N/A
Systems Affected All systems supported by this release.
Tracking number 245298
Table 3. Virtual Console Error Launching Virtual Console at a higher resolution such as 1920X1200 or 1920X1080, a no signal error may be displayed for some time.
Description After launching the Virtual Console at a higher resolution, a no signal error may be displayed for some time.
Workaround Wait for some time for the error to stop displaying or change the host resolution to default 1024x768.
Systems Affected All systems supported by this release.
Tracking number 249654/249786
Table 4. iDRAC and iSM connection failure Connectivity between iSM and IDRAC may be lost after iSM is installed on a system and is in running state before the reboot.
Description Connectivity between iSM and IDRAC may be lost after iSM is installed on a system and is in running state before the reboot.
Workaround Disable and reenable the USB NIC interface in iDRAC.
Systems Affected All systems supported by this release.
Tracking number 246159
Table 5. Java Console Virtual Media failing Unable to launch the application error displayed while launching Java Console Virtual Media application on Macintosh operating system.
Description Unable to launch the application error displayed while launching Java Console Virtual Media application on Macintosh operating system.
Workaround N/A
Systems Affected All systems supported by this release.
Tracking number 244350
Table 6. GPU information not displayed Information about GPU Part Number and Serial Number not displayed in iDRAC Overview page (PCIE Slots section).
Description Information about GPU Part Number and Serial Number not displayed in iDRAC Overview page (PCIE Slots section).
Workaround Check the Accelerators section for the above information.
Systems Affected All systems supported by this release.
Tracking number 241495
Table 7. Unable to launch Virtual Console Getting an error "Unable to connect the viewer" while trying to access Virtual Console with HTTP plug-in.
Description Getting an error "Unable to connect the viewer" accessing Virtual Console while iDRAC GUI is launched with HTTP IP address.
Workaround Launch iDRAC GUI with HTTPS IP address before launching the Virtual Console.
Systems Affected All systems supported by this release.
Tracking number 232462
Table 8. Virtual console display in iDRAC GUI is blurred Virtual console display from iDRAC GUI is blurred for a fraction of second and gets corrected automatically when opened in Google chrome.
Description Virtual console display from iDRAC GUI is blurred for a fraction of second and gets corrected automatically when opened in Google chrome.
Workaround Use any other browser.
Systems Affected All systems supported by this release.
Tracking number 182595
Table 9. Few Virtual Keyboard keys not working for other languages Some keys or key combination may not provide the correct output for languages other than English.
Description Some keys or key combination may not provide the correct output for languages other than English.
Workaround Use the physical keyboard or Windows On-Screen Keyboard.
Systems Affected All systems supported by this release.
Tracking number 181505
Table 10. Webserver restarts after remote presence port number is updated Changing the Remote Presence Port number through virtual console settings page may cause a system restart, further causing a session timeout for iDRAC GUI.
Description Changing the Remote Presence Port number through virtual console settings page may cause a system restart, further causing a session timeout for iDRAC GUI.
Workaround N/A
Systems Affected All systems supported by this release.
Tracking number 144597

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\