Description | After an AC power cycle during an iDRAC firmware update, Lifecycle logs may display RAC1198 message stating "Unable to update the LCD panel firmware either because of connection issues or the LCD bezel is damaged." |
Workaround | No action is required as there is no functional impact. |
Systems Affected | PowerEdge R7625 |
Tracking number | 240671 |
Description | After BIOS recovery is complete, Auto Power-on not Initiating. |
Workaround | Power on the system manually to complete BIOS recovery process. |
Systems Affected | All systems supported by this release. |
Tracking number | 232664/233395 |
Description | iDRAC time will not synchronize when Server Configuration Profile was exported with SNTP settings and then imported with SNTP settings. |
Workaround | Configure NTP settings and export the Server configuration Profile. Import the Server configuration profile with NTP and manually configure SNTP settings. |
Systems Affected | All systems supported by this release. |
Tracking number | 181069 |
Description | While the system is in power off state, iDRAC fails to obtain the current time after it is reset. Older logs are displayed until iDRAC synchronizes with current time. |
Workaround | N/A |
Systems Affected | All PowerEdge Rxxx5/Cxxx5 systems supported by this release. |
Tracking number | 183347 |