Using autocomplete feature
Use the autocomplete feature in firmware RACADM to:
For example:
- Example 1:
racadm>> <press tab>
arp
autoupdatescheduler
clearasrscreen
clearpending
closessn
clrraclog
.
.
.
.
.
.
.
vflashsd
vflashpartition
vmdisconnect
cd
quit
- Example 2: racadm>> get <press tab>
get
getled
getniccfg
getraclog
getractime
getsel
getsensorinfo
getssninfo
getsvctag
getsysinfo
gettracelog
getversion
- Example 3:
racadm>> getl<press tab>
racadm>> getled <press enter> or <racadm getled>
LEDState: Not-Blinking
- Example 4:
racadm>> get bios.uefiBootSettings
BIOS.UefiBootSettings
BIOS.UefiBootSettings.UefiBootSeq
BIOS.UefiBootSettings.UefiPxeIpVersion
NOTE:
- In the RACADM autocomplete mode, type the commands directly without giving racadm as prefix.
- NIC/FC/InfiniBand FQDDs are configuration-dependent. To find FQDDs present in system, run the RACADM command
racadm hwinventory NIC/FC/InfiniBand
Data is not available for the Topic