Integrated Dell Remote Access Controller 9 Attribute Registry

NIC.FCoEGenParams.FCoEBootScanSelection (Read or Write)

Description

Configuration of the port's behavior in booting the system from FC Target(s). Only behaviors supported by the option-ROM need to be implemented. In the following cases, no fabric discovery shall be attempted: Disabled - Initiator does not attempt to boot. Specified LUN - Initiator attempts to boot to the specified World Wide Port Name and LUN for 1st target, if that fails then a boot using the 2nd target parameters shall be attempted. In the following cases, fabric discovery shall be attempted and the resulting discovered targets will be put in a list sorted by the reported FC destination ID. This list will be checked in order until the selected LUN policy is met: First LUN - attempt boot from the first bootable LUN of the targets discovered by adapter. First LUN 0 - attempt boot from the first bootable LUN 0 of the targets discovered by adapter. First LUN Not LUN 0 - attempt boot from the first bootable LUN that is not LUN 0 of the targets discovered by adapter. Fabric Discovered LUN - attempt boot based on the LUN assignment provided by management infrastructure in the fabric.

Legal Values

• Disabled
• First LUN
• First LUN 0
• First LUN Not LUN 0
• Fabric Discovered LUN
• Specified LUN

Default Value

Disabled

Write Privilege

None

License Required

iDRAC Express or iDRAC Enterprise

Dependency

Not Applicable